Description
| Voltage Absence Testing (VAT) | |
| Voltage Indication - LEDs | 12 to 1000Vac ; 12 to 1400Vdc |
| Voltage Indication - Display | 1 to 1000Vac ; 1 to 1400Vdc |
| Frequency Range | DC, 16.67 to 800Hz |
| Input Impedance | >500kΩ |
| Max. Peak Current | 3.5mA RMS |
| Polarity Indication | Yes |
| Redundant Hazardous Voltage Indication | The ELV (Extra-Low Voltage) LED indicates that the voltage is higher than the SELV (Safety Extra-Low Voltage) with the rate at which it flashes proportional to the voltage level. |
| Stray Voltage Detection | Yes (by low-impedance load switching) |
| RCD Tripping | Yes (by low-impedance load switching) |
| Phase/Neutral Identification | >50V (45 to 65HZ) ; >150V (16.67 to 45Hz) |
| Continuity & Resistance | |
| Buzzer Trigger Threshold | 100Ω typical (150Ω max.) |
| Extended Continuity Test (resistance) | 2kΩ, 60kΩ, 300kΩ |
| Test Current / Open-circuit Voltage | ≤ 1mA / ≤ 3.3V |
| Phase Rotation | 2-wire method with microprocessor |
| Ph/Ph Voltage | 50 to 1000Vac (45 to 400Hz) |
| General | |
| Buzzer | Intermittent beep for Voltage Detection, Continuous beep for Continuity |
| Cable Length | 3.3ft (1m) |
| Display | LEDs + Backlit Digital Display |
| Power Supply | 2 x AA (LR6) Batteries (included) |
| Battery Life | 5000 ten second measurements approximately |
| Dimensions | 9.0 x 2.4 x 1.5” (228 x 60 x 39mm) |
| Weight (With Battery) | 12.4oz (350g) approximately |
| Operating Temperature/Humidity | -22 to 140˚F (-30 to +60˚C) / 20 to 95% RH non-condensing |
| Storage Temperature/Humidity | -40 to 158˚F (-40 to +70˚C) / 20 to 95% RH non-condensing |
| IP Rating | IP 65 |
| Electrical Safety | 1000V CAT IV per IEC 61010-1 |
User Manuals
Datasheets
Brochures
Buy Test Equipment, Get Free Calibration
Free calibration on Test Equipment
Get free in-house calibration when you buy select test equipment from Byram labs.
Offer valid through 12/31/2021