Model: K100
Part Number: 1200.67
Ordering Number: 1A0015
The DC/AC Microprobe Model K100 measures as low as 100μA AC or DC. The unit has proportional mV output for direct readings on DMMs, loggers and oscilloscopes. It has an ultra-compact size and non-contact clamp-on convenience. No range or mode (AC/DC) switching required.
General Features
| Maximum Conductor Size |
3/16”, 0.18" (4.5mm) |
| Current Range |
4.5ADC / 3Arms AC |
| Measurement Range |
100µA to ±4.5ADC / 100µA to 3Arms AC |
| Output |
5 ft (1.5m) lead with two 4mm banana plug |
| Output Signal |
1mV/mA |
| Resolution |
DC: 50µA, AC: 100µA typical |
| Accuracy |
DC: 1% R ± 200µA; AC: 2% R ± 200µA |
| Output Noise |
<100µV, DC to 3kHz |
| Frequency Range |
DC to 2kHz |
| Output Impedance |
200Ω |
| Overload |
±4.7A |
| Power Source |
One 9V alkaline battery |
| Battery Life |
20H |
| Operating Temperature |
14° to +131°F (-10° to +55°C), 95% RH |
| Storage Temperature |
-40° to +176°F (-40° to +80°C) |
| Dimensions |
Probe: 4.4 x 0.6 x 1.0” (111 x 15 x 25mm)
Module: 4.9 x 2.5 x 1.1” (124 x 64 x 28mm) |
| Weight |
9oz (250g) |
| Ingress Protection |
IP 40 |
| EMC |
EN50082-1 class A, EN 50081-1 |
| Safety Compliance |
EN 61010-1 300 V CAT II |
