Description
The Simple Logger® II Model L562 is a two channel Volt/Amp data logger. The choice of data storage modes and storage rates allows the operator to effortlessly configure the logger to optimize memory usage to the application at hand. Extended Recording Mode XRMTM and delayed start time are just two of the many application friendly features. The Simple Logger® II records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the inputs are ignored between measurement intervals.
NOTE: There are many compatible current probes available as an accessory. The following current probes will also need the Adapter Cat. #2118.46 which is sold separately:
MF 300-6-2-10 | 300-24-2-1 | 1000-24-1-1 | 1000-24-2-1 | 1000-36-2-1 | 6000-36-2-0.1 | 30000-24-2-0.1 | MN01 | MN02 | MN03 | MN93-BK | MN193-BK | MN251 | MN255 | MN353 | MN373 | MN375 | MN379 | SR193-BK | SR661 | SR752 | SR759
| Channels | Two | |
| Connection | Current Channel | Voltage channel |
| Input | BNC | 4mm safety banana jacks |
| Ranges (2) | 0 to 1V for use with current probe with mV output | 5 to 600VAC |
| Accuracy (50/60Hz) | 10 to 50mV: ±(0.5% R +1mV) 50 to 1000mV ±(0.5% R +0.5mV) | 5 to 50V: ±(0.5% R +1V) 50 to 600V: (0.5% R +0.5V) |
| Resolution | 0.1mVAC | 0.1VAC |
| Maximum Input Voltage | 5rms or ±7.07VPeak | 1.2 x 600V rms or 720Vrms |
| Input Impedance | 800kΩ | 40MΩ |
| Sample Rate | 64 samples / cycle | |
| Storage Rate | Programmable from 125ms to 1 per day | |
| Storage Modes | Start/Stop, FIFO, extended mode (XRM) and Alarm | |
| Recording Length | 15 minutes to 6 weeks, programmable using DataView | |
| Memory | 240,000 measurements (512KB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed. | |
| Communication | USB 2.0 optically isolated | |
| Power Source | 2x1.5V AA (LR6) alkaline batteries | |
| Battery Life | 100 hours to >45 days (depending on sample rate/recording length) | |
| Dimensions | 4.94 x 2.75 x 1.28” (125 x 70 x 32mm) | |
| Weight (with Battery) | 6.4 oz (180g) | |
| Case | Polycarbonate | |
| Operating Temperature | 14° to 122°F (-10° to 50°C) | |
| Storage Temperature | -4° to 140°F (-20° to 60°C) | |
| Relative Humidity | Up to 85% @ 95°F (35°C) | |
| Ingress Protection (IP) | IP40 | |
| EMC | EN 61326-1 | |
| Safety Compliance | IEC 61010-1, EN 61010-2-32 600V CAT III Pollution Degree 2 | |
User Manuals
Quick Start Guides
Datasheets
Brochures
Comparison Charts
Software/Firmware
Ver. 3.61.0008 Open Release Notes for the latest updates | Models Supported by DataView
Release Date: November 12, 2019
DataView Complete (Report generation and control panels)
Executable: Version 3.61.0008 - .exe
Zipped File: 471MB Version 3.61.0008 - .zip
IMPORTANT:
- Back-up all template files before installation to ensure that they do not get overwritten.
- Uninstall previous versions of DataView before installing a new version.
- PQL Loggers and Sentinel Series are no longer supported by DataView. See bottom of the page for a compatible version
Supported Operating Systems:
Windows 7 (32 & 64 Bit)
Windows 8/8.1 (32 & 64 Bit)
Windows 10 (32 & 64 Bit)