The Lightmeter Model 1110 is a portable, easy-to-use instrument which features optical sensors that are designed to match the response of the human eye, making them ideal instruments for workspace analysis and planning. The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using supplied DataView® software. The ergonomically designed case, large display and intuitive function selection make this instrument the right choice for any application. The Lightmeter Model 1110 is designed for simple one-hand operation. It provides selectable lux or footcandle units for display and features a blue luminescent backlit display, MIN/MAX/AVG and HOLD functions.
Channel
One with LCD display and Backlight
Input
Detachable silicon (Si) sensor Class C Lightmeter per NF C 42-710
Accuracy
±3% of R on incandescent sources (default mode) ±6% of R on LEDs (3000K to 6000K) ±9% of R on florescent sources
Accuracy with compensation
LED mode: ±4% of R (at 4000K) Flou mode: ±4% of R (type F11, 4000K)
Resolution
0.1lux from 0.1 to 999.9lx 1lx from 1000 to 9.999lx 10lx from 10.00klux to 99.99klx 100lx beyond
0.01fc from 0.01 to 99.99fc 0.1fc from 100.0 to 999.9fc 1fc from 1.000 to 9.999fc 10fc beyond
Recording
Manual start/stop on the product Short press for MEM: spot recording/long press for REC at the define default rate Programed recording: start date, recording interval, and end date defined using DataView®software
Other functions
MIN-AVG-MAX-HOLD
Sampling Rate
Programmable from 1s, 2s, 5s, 10s, 20s, 30s, 2min, 5min, 10min, 15min, 30min, and 1hr
MAP mode
The MAP mode can be used to map the lighting on a surface of a room. In this case the measurements are saved in the same file
Memory
1,000,000 measurements on each channel (4MB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed.
Communication
USB 2.0 and Bluetooth
Power Source
3x1.5V AA(LR6) alkaline batteries or USB port (micro-USB adaptor offered as an accessory)
Battery Life
500 hrs., 3 years with 15 minute intervals
Dimensions: Case Sensor
5.9 x 2.84 x 1.28" (150 x 72 x 32mm) 2.64 x 2.52 x 1.38" (67 x 64 x 35mm)
Weight (with battery)
12.2oz (345g) with batteries
Case
Polycarbonate
Operating Temperature
14° to 140° F (-10° to 60°C)
Storage Temperature
-4° to 140° F (-20° to 60°C)
Relative Humidity
Up to 90%
Ingress Protection (IP)
IP50 with USB connector closed and protective cap on the sensor
